Komponen Elektronika dan Hobi Robot

Harga Rp. 147.500 (kontak untuk ketersediaan produk) harga diluar ongkos kirim Isi Paket (lihat gambar) 1x Arduino Pro Micro Development Board 2x pin out Product Description The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. This is the 5V version so, as always, keep in mind the limits of system voltage and so forth. The lower system voltage also has its advantages, though, like ease of use with many common 5V sensors. There is a voltage regulator on board so it can accept voltage up to...

Harga Rp. 140.000 (cek dahulu untuk ketersediaan stock) harga diluar ongkir Product Description This kit contains everything you need to build your very own Uno-Compatible development board! Simply follow the Assembly Guide and after some basic soldering, you’ll have made a fully-functional Arduino-compatible board (in fashionable SparkFun Red). The included ATmega328 comes pre-loaded with the Arduino “Optiboot” bootloader so you don’t have to worry about loading the firmware, simply solder it together, connect an FTDI Basic and load your favorite Arduino sketch! Note: You will need either an FTDI Basic or FTDI cable to load code. isi paket: 1 x Arduino-Compatible PTH Kit PCB 1 x ATMega328 with Optiboot bootloader 1 x MCP1700 3.3V Voltage Regulator 1 x 5mm Green LED 1 x 5mm Red LED 2 x 330Ohm Resistor 2 x 10kOhm Resistor 1 x 16MHz Crystal 2 x 22pF Ceramic Capacitors 5 x 0.1uF Ceramic Capacitors 2 x 100uF Electrolytic Capacitors 1 x LM7805 5V Regulator 1 x Dio...