Posts

Showing posts from November, 2013

TEC1-12706 Thermoelectric Peltier Cooler (12V, 60W)

Image
Ready Stock : 2 Units Harga Rp. 80.000 (harap kontak untuk cek ketersediaan produk) (harga diluar ongkos kirim) Isi Paket 1x TEC1-12706 Product Description Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts Specification Model: TEC1-12706 Size: 40mm x 40mm x 4mm Operates from 0~15.2V DC and 0~6A Operates Temperature: -30℃ to 70℃ Max power consumption: 60 Watts These devices must be used in conjunction with a heat sink to avoid burned in 2 seconds after powered up Each device is full inspected and tested Fitted with 6-inch insulated leads The side with words are the cooling side, and other side is the warm side.

Arduino Mega 2560 R3

Image
Harga Rp. 295.000 (kontak untuk ketersediaan produk) harga diluar ongkos kirim Isi Paket 1x Arduino Mega 2560 R3 + Kabel USB Product Description Arduino Mega 2560 R3 is a microcontroller board based on the ATmega 2560, fully compatible with Arduino mega 2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila. Features Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage: 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Mem

Saleae8 USB Logic Analyzer 24M 8-Channel

Image
Harga Rp. 220.000 (kontak dahulu untuk ketersediaan produk) harga diluar ongkos kirim Product Description A very useful debugging tool for digital signal analyzing, help you fully analyzing the UART, IIC, SPI, CAN all of these interface. If you don’t want start with expensive oscilloscope, this will be another good choice. Features A total of eight digital channels, =voltage range is 0V ~ 5.5V, the voltage threshold is considered to be low below 1.5V, 1.5V above is considered high. Package includes the main device, 10pins of dupont cable and one USB cable. See basic how it works and how to use the introduction video below. Samples : How much samples to collect, Mhz: frequency of sampling, so 50M * 1Mhz will be 50 total sampling time. This one is a starter version, different to Saleae16, which has 100Mhz, 16-channel version